8 9
 
1
 
 
 
   

0

00

0

 

 

 

 

1-6C IMPACT (PA 6C + Plasticiser)

Colours available: Blue, Grey

This grade was specifically developed for applications requiring high impact resistance. Other important characteristics are improved insensitivity against stresses, sharp edges, notches and scratches. It also exhibits improved noise reduction and great load bearing capabilities.

  • Significantly improved impact resistance
  • Improved insensitivity against stresses, sharp edges, notches and scratches
  • Free of internal stresses
  • Good mechanical, thermal and chemical resistance properties
  • Improved noise reduction capability
  • Good PV and load bearing capabilities
  • Good dimensional stability

2-6C HS BLUE (PA 6C + UV & Heat Stabilisers)

Colours available: Blue

Additives in the form of high temperature resistant colorants, heat and UV stabilisers allow this material to better retain mechanical properties in applications operating at higher temperatures. The inorganic dye used to produce HS BLUE's distinctive colour conforms to the specifications required by the Japanese market for cast nylon.

  • Better performance at higher operating temperatures
  • Heat stabilised colourants
  • UV stabilised
  • Improved mechanical properties
  • Excellent chemical resistance properties
  • Good PV and load bearing capabilities
  • Conforms to Japanese standards
  • Fatigue resistant

3-POM C (Copolymer)

Colours available: Natural, Black

The copolymer grade is the ideal combination of strength, stiffness and wear resistance. It absorbs very little moisture, is easily machinable and is genuinely porosity-free, making it the preferred grade for food contact and medical applications. The product exhibits an elevated resistance to hydrolysis, strong alkalis and thermal-oxidative degradation when compared to acetal homopolymer.

  • High mechanical strength and rigidity
  • High impact strength and creep resistance
  • Excellent dimensional stability and machinability
  • Low moisture absorption
  • Good electrical insulating and dielectric properties
  • No centreline porosity in copolymer grades
  • Suitable for food contact

4-POM H Acetal homopolymer (DuPont™ Delrin®)

Colours available: Natural

The homopolymer grade exhibits slightly higher mechanical properties, illustrated in the hardness, rigidity and creep resistance. The material also demonstrates elevated wear resistance and has a lower thermal expansion rate than acetal copolymer.

  • High mechanical strength and rigidity
  • High impact strength and creep resistance
  • Excellent dimensional stability and machinability
  • Low moisture absorption
  • Good electrical insulating and dielectric properties
  • No centreline porosity in copolymer grades
  • Suitable for food contact

 
 
10 11 12
 
 
  contact us